Make a Wooden Fence for Your Table Saw and Save a Few Bucks Besides the blade, the most important part on a table saw is the fence. If yours is beat up or you just want a new one, here's how you ...

Make sure the table saw blade is lowered all the way, then lay the sled base flat onto the runners, using the table saw fence to keep the plywood as square to the table as possible.

In theory, the fence will never go out of true, and the width of cut can be a lot wider than the typical table saw – an impressive 3 feet to the right of the blade.

If you're looking to speed up your projects, you can use these clever tricks to make carpentry measuring faster and better.

Back in the bad old days, table saw fences were terrible. You would have to measure the top and bottom of the fence before each cut, just to make sure the fence was square to the blade.

A table saw blade spins towards you, from the top downward, so the sharp blades must face the front of the table saw and not ...

1. Place your level on the table saw, flush against the fence. Then place the board you want to joint on the table saw, against the level, with the flattened face down.

It's the best saw for chopping up 2x4s to make wall frames, cutting boards into shelves, cutting boards for a deck, fence, or garden bed, cutting moulding and baseboards, cutting angled corners ...