Mar 14, 2016 · The most recent problem is the iDos drawer has stopped dosing detergent into the machine. Ive tried cleaning and rinsing but with minimal luck. From the looks of things the top of drawer (which contains the detergent pump and detergent sensors) is pretty filthy and should probably be cleaned before investigating replacement parts.

The error code E3080 on your Bosch Series 8 IDOS washing machine indicates that the machine is unable to pump out the detergent solution. This can be caused by a blockage in the detergent dispenser, pump, or drainage system.

This indicates the hose that goes from dispenser to drum may be clogged. If it is under warranty then please contact manufacturer to book repair. If it is out of warranty then please try this to solve the issue: You will have to unplug the appliance and pull it out.

Mar 14, 2016 · The most recent problem is the iDos drawer has stopped dosing detergent into the machine. Ive tried cleaning and rinsing but with minimal luck. From the looks of things the top of drawer (which contains the detergent pump and detergent sensors) is pretty filthy and should probably be cleaned before investigating replacement parts.

Feb 2, 2023 · The problem is that the machine does not use a detergent from the container and after every washing cycle an error E:00 is displayed (when iDos is selected to 1, 2 or 3; when it is off, there is no error).

These issues may occur if the hose that connects dispenser to drum is clogged. Please try this to solve the issue: You will have to unplug the appliance and pull it out.

Dec 3, 2023 · Detergent dispensers leaking is commonly caused by clogged dispenser drawer, worn seals, incorrect detergent type or valve issues. The dispenser is designed to release detergent at specific points during the wash cycle. If water is leaking from it, it could be due to several reasons:

Aug 13, 2023 · The IDOS pump for fabric softener is working properly, but the detergent pump is out of order. How should I replace that pump? What I have done: I removed the detergent drawer and after washing, I removed the upper compartment and found two pumps that have four crv 2.5 screws (five-bladed screw).

When a washer detergent dispenser stops working, it is commonly caused by low water pressure in the home or a faulty water inlet valve that doesn't supply water to the dispenser. It is also possible that the dispenser drawer itself is blocked or damaged, preventing the detergent from being dispensed properly.

Cleaning the Dispenser: Regularly clean the detergent dispenser to prevent buildup. Replacing Hoses: If hoses are damaged or kinked, they should be replaced to restore proper water flow. Checking the Pump: If the detergent pump is faulty, consult the service manual for …