Find the technical documentation you need to build your James Hardie project from start to finish. From clearance requirements to installation videos to CAD files, we've got you covered.

Mar 28, 2024 · If you don’t find the answer to your question, you can browse Hardie Plank lap siding installation instructions here (just be sure you’re using the right instructions for your Hardie® Zone — HZ5® or HZ10®).

• James Hardie Building Products provides installation/wind load information for buildings with a maximum mean roof height of 85 feet. For information on installations above 60 feet, please contact JH technical support.

Get access to installation instructions, specs, product details, best practices, warranty info, and more. Our resources are up to date with the latest in building codes and building science. Check out resources for your team.

James Hardie Building Products provides installation /wind load information for buildings with a maximum mean roof height of 85 feet. For information on installations above 60 feet, please contact JH technical support.

this Installation Guide to help builders and contractors with the installation of James Hardie® siding and trim products, including James Hardie products with ColorPlus ® Technology. The first sections of this manual provide a general product …

BEFORE INSTALLATION, CONFIRM YOU ARE USING THE CORRECT HARDIEZONE® PRODUCT INSTRUCTIONS BY VISITING HARDIEZONE.COM OR CALL 1-866-942-7343 (866-9-HARDIE). All profiles can be installed horizontally, vertically, and as soffit.

• James Hardie Building Products provides installation/wind load information for buildings with a maximum mean roof height of 85 feet. For information on installations above 60 feet, please contact JH technical support.

These instructions to be used for single family installations only. For Commercial / Multi-Family installation requirements go to www.JamesHardieCommercial.com HardiePanel vertical siding can be installed over braced wood or steel studs spaced a maximum of 24" o.c. See general fastening requirements.

Install Hardiplank® siding in compliance with local Building Code requirements for clearance between the bottom edge of panel/framing and the adjacent finished grade. At the juncture of the roof and vertical sur-faces, flashing and counterflashing shall be provided per the roofing manufacturer’s instructions.