All liquid phase bag filter units are piped with inlet and outlet valves, pressure gauges and sample ports. The liquid to be filtered enters the housing above the bag and passes through the bag from the inside.

For new applications, the clean pressure drop of the system, housing and bag should be 2.0 PSI or less. The lower the value is, the more contaminant a bag will hold. For applications with low dirt loading, this value can go to 3.0 PSI or more. Consult the factory for recommendations when the clean pressure drop of the system exceeds 3.0 PSI ...

Mar 13, 2013 · TIGG Corporation offers Multi-Bag Water Filtration Units with either 6 or 12 bag cavities. The filtration units are constructed of 304 stainless steel and provide reliable and efficient performance in removing suspended solids and gelatinous particles from liquid streams.

The most important factor in selecting a housing size for a filter bag application is the initial total clean pressure drop for the system, ∆∆∆∆PS. The pressure drop, ∆∆∆∆PS, consists of the pressure drop caused by the housing ∆∆∆PH with the bag basket in place plus the pressure drop caused by the filter bag ∆∆∆∆PB.

pressure drop caused by the filter bag. SUMMARY For new applications, the clean pressure drop of the system, housing and bag should be 2.0 PSI or less. The lower the value is, the more contaminant a bag will hold. For applications with low dirt loading, this value can go to 3.0 PSI or more. Consult the factory for recommendations when the clean

Our TIGG line offers activated carbon and media filtration systems, providing effective treatment solutions for air and water purification needs.

The value obtained in step 3, ∆PB is the clean pressure drop caused by the filter bag. SUMMARY System Pressure Drop = ∆PS = ∆PH + ∆PB For new applications, the ∆PS should be 2.0 psi (0.14 bar) or less. For high contaminant loading applications, this value should be as low as possible. The lower this value is, the more contaminant a ...

The value obtained in step 3, APB is the clean pressure drop caused by the filter bag. SUMMARY system Pressure Drop = APS = APH + APB For new applications the APS should be 20 psi or less. For high contaminant loading applications, this value should be as bw as possible. The lowerthis value is, the more contaminanta bag will hold. For

May 8, 2024 · The primary causes of high differential pressure in bag filters include clogged or damaged filter bags, improper installation, and operational inefficiencies such as incorrect air-to-cloth ratios and inadequate cleaning cycles.

Apr 16, 2024 · The size of the bag filter housing plays a crucial role in controlling both the flow rate and pressure drop. An undersized housing can result in high fluid velocity and increased pressure drop, while an oversized housing can lead to low fluid velocity and inadequate agitation of the filter media.