Automatically detects instruments connected to your PC and configures the interfaces. Enables instrument communication for a variety of development environments (MathWorks MATLAB, Python, NI LabVIEW, Microsoft Visual Studio and more). …

The Keysight 82357B USB/GPIB Interface provides a direct connection from a USB port on your laptop or desktop PC to GPIB instruments. There are no switches to set, no PC cards to install, and no external power supplies required.

Keysight instrument control hardware enable: • Easy connection to GPIB instruments based on simple plug-and-play setup and configuration. • Use of PC-standard interfaces that are prevalent even on notebook PCs, such as USB and LAN. • A wide selection of interfaces to fit your test system application – PCI, PCIe®, USB and LAN.

This section describes how to set the interface necessary to use the GPIB (General Purpose Interface Bus) of the E5063A. Setting talker/listener GPIB address of E5063A. When controlling the E5063A using GPIB commands from the external controller connected to the GPIB connector, you need to set the talker/listener GPIB address of the E5063A.

The Keysight 82357B is an adapter that creates a GPIB Interface from one of your unused VNA USB ports. The 82357B can be used to connect a GPIB device using the VNA USB for any VNA application. In addition, the 82357B can be used to connect a power meter for a source power calibration. Download and install firmware VNA revision 3.0 or greater.

07 | Keysight | GPIB, USB and Instrument Control for Easy PC-to-Instrument Connections - Data Sheet Features – High transfer rate of 1.4 MB/s – High flexibility via up-plugging (to x4 or x8 PCIe slots) – 3.3 V signal level for lower power consumption Best for – Bandwidth-intensive test applications – Standard and low-profile brackets

To set the signal generator GPIB address to another address, press the following keys or use the provided SCPI: Tap or click System Menu > Settings > IO Configuration > GPIB Interface > GPIB Address. Use the number keys to enter a GPIB address value.

The General Purpose Interface Bus (GPIB) is a system of hardware and software that allows you to control test equipment to make measurements quickly and accurately. This topic contains the following information: The GPIB Hardware Components. The GPIB / SCPI Programming Elements. Specifications. GPIB Interface Capability Codes

82357B is a USB/GPIB interface provides a direct connection from a USB port on your laptop or desktop PC to GPIB instruments. There are no switches to set, no PC cards to install, and no external power supplies required.